Procedure for Setting Balanced Plugs

Procedure for Setting Balanced Plugs

1. RUN drillpipe with a stinger of tubing to the planned depth of the bottom of the plug.


* The stinger should have side jets and should be at least 100 ft longer than the planned cement plug. Use 3.1/2in or smaller tubing in holes with a diameter of 12.1/4in or less.

* The smaller the diameter of the stinger, the less the disturbance to the cement when pulling out of the plug.

2. CIRCULATE a minimum of 150 % of the . . .

Restricted Content

Subscribe to view the Content